Molding operation Injection Molding Machine
As for the molding of Iupilon / NOVAREX, either the hydraulic type or the toggle type is available.
Since the average value of the mold internal pressure in the molding of Iupilon / NOVAREX is 350-500kg/cm2, the
clamping force F can be calculated by the following equation.
F（ton）＝（0.35～0.50） × S
S: projected area as indicated in Fig. 1･2-1. However, it is necessary to note that when
the arrangement of molding is eccentric from the center of mold (center of die plate), the clamping force,
which is higher than the above formula is required.
1･2-1 Selection of molding machine from clamping pressure
